@felmue thank you for the suggestion for Ext Port for Core2.

@gavin67890 that would be nice. I was planning on printing a water resistant case. I'll share the file when done.

@mtylerjr I'm not sure when the new product is coming. I hope the upcoming hardware is released soon though.

Thank you. I appreciate your hard work.

That's unfortunate to hear.

Put me down for 4 Stamp Capsules.

Did you figure out how to add buttons? I have a S3 coming Monday. I'll share how to do it if I figure it out. I'm new to programming, but I'll do my best to help you.

@ajb2k3 🤔 I believe I did. I can see my Atom Lite, Atom Matrix, AtomS3, and AtomS3 Lite.

@mtylerjr Please share what you find out.

@pandian-nano I can't access it through M5burner.

@pandian-nano Thank you. I have read through that several times and it makes no more sense than the time before. I'll eventually come across something that I understand and it will sink in. Thanks again.

@pandian-nano said in Pb.HUB will not connect.:

97

I now get [97] and True. I just tried using digital and analog read. Both are working as expected. That was a really cool party trick! Where can I read more about what you walked me through. I obviously have no issues making bad code. I need to know how to clean up my own messes and how to debug. Thank you so much for the help. I appreciate it more than you know.

@davincino Thanks for posting your findings.

I can't access the settings to turn off the annoying start up beep as well.

@pandian-nano Thanks. This is the out come. I looked up the Hex for 96 and I get 0x60. I believe I need to set init and/or set the new address. Is the answer as simple as using the Write Memory Data under I2C Master? Is the included block what I need to burn? I'm doing my best to learn this, but damn there is a lot to learn!

I tried using this code and I had no change.

I have lost track of how many times ive erased and downloaded the firmware. This is the last Terminal screen.

Connected to Serial Port!
( �m�!0ϟ��( �m�!0���
_ __ _
_ ()/ | | _____ __
| | | | | || |/ _ \ \ /\ / /
| || | | | | () \ V V /
_,||| ||___/ _/_/

APIKEY: 2F9D3FE8
Traceback (most recent call last):
File "main.py", line 12, in <module>
File "unit.py", line 190, in get
File "<string>", line 1, in <module>
File "units/_pbhub.py", line 15, in init
File "units/_pbhub.py", line 21, in _available
Unit: Pb.hub unit maybe not connect
MicroPython b0cb55176-dirty on 2023-08-03; M5Stack with ESP32
Type "help()" for more information.

I felt I was making decent progress at first. I have had so many failures now, I question the little bit I do know. Tried Uiflow V2 but Pb.Hub is not available.

@pandian-nano Thanks for the suggestion and help. This is what is in the terminal.

=== from m5stack import *
=== from m5stack_ui import *
=== from uiflow import *
=== import i2c_bus
=== import time
=== import unit
=== screen = M5Screen()
=== screen.clean_screen()
=== screen.set_screen_bg_color(0xFFFFFF)
=== pbhub_0 = unit.get(unit.PBHUB, unit.PORTA)
=== i2c0 = i2c_bus.easyI2C(i2c_bus.PORTA, 0x00, freq=400000)
=== i2c0.addr=(0x68)
=== while True:
=== print(i2c0.scan())
=== wait_ms(200)
=== wait_ms(2)

Traceback (most recent call last):
File "<stdin>", line 10, in <module>
File "unit.py", line 190, in get
File "<string>", line 1, in <module>
File "units/_pbhub.py", line 15, in init
File "units/_pbhub.py", line 21, in _available
Unit: Pb.hub unit maybe not connect

@ajb2k3 I'm referring to M5Burner, Firmware Exporter. I'm downloading and burning, yet can't export the firmware.

This didn't age well.

I can't connect PbHUB V1.1 to Atom Lite or Tough.