Topics created by MCU1536

@MCU1536 I've just pulled speaker plug out

@ajb2k3
After burned with M5_CoreMP135_debian12_20240919.img
Don't restart the MCU.
I tried the commands as below.

root@CoreMP135:~# sudo service ssh start root@CoreMP135:~# sudo adduser good ifconfig
eth0: inet 192.168.1.45
root@CoreMP135:~# ssh good@192.168.1.45 CoreMP135 Partition Resize

After reboot the MCU.
The MCU can boot-up.

Thank you for very much for your help.

@MCU1536
yes but you need to compile the driver yourself
https://docs.m5stack.com/en/guide/linux/coremp135/network

@robski I’m using the Debian image. Did you configure the UIFlow service to auto load on restart?

@MCU1536 no its command line only at present.

@MCU1536 You cant it just doesn't have the power.
The Core has a custom bistro because the kernel has to be compiled specifically for the CoreMP135 specific hardware setup.