After updated, I restart it. It hang up.
The Device Manager cannot find COM Port.
I tried to burn image for 2 time.
It still hang up.

root@CoreMP135:~# pip list
Package Version

certifi 2025.1.31
charset-normalizer 3.4.1
distro 1.8.0
evdev 1.9.1
idna 3.10
paho-mqtt 2.1.0
pip 23.0.1
PyAudio 0.2.14
pyserial 3.5
requests 2.32.3
setuptools 66.1.1
smbus2 0.5.0
uiflow2 0.0.1rc1
urllib3 2.3.0
wheel 0.38.4
root@CoreMP135:~# uiflow2
UIFlow2 running PID: 2974
root@CoreMP135:~# uiflow2 enable
Created symlink /etc/systemd/system/multi-user.target.wants/uiflow2.service →
/etc/systemd/system/uiflow2.service.
enable uiflow2 service success
root@CoreMP135:~#

@robski

After I use latest M5_CoreMP135_debian12_20240919.
I can install UiFlow2.
Thank you very much for your help.

@robski

I tried it on Putty via USB.
Result is the same. It cannot add the user.

@robski

I tried the command as below result.
My IP: 192.168.1.55
Password: root

ssh root@192.168.1.55

root@192.168.1.55's password:

sudo adduser good

-sh: sudo: not found

@robski

I tried to add the user as below result.

sudo adduser good

-sh: sudo: not found

After logged in, I followed CoreMP135 Network Management.
And then I followed CoreMP135 UiFlow2 Quick Start to install UiFlow2.
It returned below message.

apt update

-sh: apt: not found

Could you suggest me to solve this problem?

Such as TL-WN725N 150Mbps Wireless N Nano USB Adapter.

Can CoreMP135 connect to the WIFI?
I would like to update the system and install Python whl Package and CoreMP135-UiFlow2 package.

@kuriko
When I clicked the Run button.
And connected the serial port.
The WebTerminal dialog box appeared and shown "Connected to Serial Port!" message.

• I pressed Download the program to device button on WebTerminal dialog box.
  The Progress status shown and then it was stuck.

• I pressed Run button on WebTerminal dialog box.
  It returned

^C

^C

^C

^C

I tried to write the code and download to CoreMP135 by UIFlow 2.2.4.
I pressed Download the program to device button.
And connected the serial port.
The WebTerminal dialog box appeared and shown login message.
And then I pressed Download the program to device button on WebTerminal dialog box.
The Progress status shown and then it was stuck.

Could you suggest me to solve this issue?