Topics created by hetzer

@hetzer said in issue with lego+ aka DC Motor module:

I cant make lego+ aka dc motor module.
It gives error" moduel' object has no attribute Legoboard.
Can anyone assist?

I guess you are using the wrong commands in UIFlow 1.6.3.

The (DC motor (Lego+) module) and its control commands UIFlow 1.6.30_1600225056699_DC-Modul.jpg

0_1600225104372_DC Motor Modul.jpg

The (BaseX module) and its control commands UIFlow 1.6.3

0_1600225187684_XBase Modul.jpg

0_1600225235884_XBase.jpg

In the description of the (DC motor (Lego+) module) the picture may be confusing because there are the commands M1 etc., but these commands are for the BaseX module and not the (DC motor (Lego+) module) !

LoRa and LoRaWAN is difference. using LoRa module in UIFlow can be difficult

@ftoure hetzer was referring to the original M5Stick not the M5stickC.
@hetzer did you manage to do what you wanted with it. I find it's better to work with original M5Stick as the M5stick didn't have much functionality in UIflow even when it was supported

Thanks so much I totally overlooked the plus sign and I was searching for a block in the map blocks. I’m grateful for you answering my question.

@mati Thanks alot. Finally burnt the new beta version.

@robinkam Could you post the micropython code for it?
That would be great, because I can't get it to work.

@hetzer that would be great.
In my scrolling and bouncing text demo's the same location 0,0 is also used for detecting the edge of the screen which is proving rather annoying.

Had to reinstall chrome but worked fine in the end.
Thanks for the help.

If you use Visual Code you could install this extension

https://marketplace.visualstudio.com/items?itemName=curdeveryday.vscode-m5stack-mpy

Then transfer your modified library to flash. It would be good to change the name to another one, so that the import function does not load the built-in urequests library. Alternatively, you would have to look in what order and from which locations the libraries are imported.

Hello,

meanwhile it is possible to use the block "analog read pin (34)" from the blockpack "Easy I/O".
So I was able to bild the probram from user M5DOCS just with UIFLOW.

Unfortunally it just shows Numbers between 450 and 600 or so. And it dows not react to any sounds.

This is the python code of the blockly program:

=====
from m5stack import *
from m5ui import *
from uiflow import *
from easyIO import *

setScreenColor(0x222222)

label0 = M5TextBox(122, 84, "Text", lcd.FONT_DejaVu24,0xFFFFFF, rotate=0)

while True:
label0.setText(str(analogRead(34)))
wait_ms(100)
wait_ms(2)

What did I do wrong?

Hello @hetzer,

Try this operation

0_1552877441605_微信截图_20190318104933.png

if only use mpu6050,i try fix yaw offset， but Failed .....

@lukasmaximus Thanks Lukas. I had posted in another subject. The desktop ide does not allow me to create variable. I see the icon put does not open the pop up screen to name the variable.