Posts made by Michael1968

Sieht doch schon ganz gut aus...
Look cool

@michael1968
I have upload some examples how to use M-5Stick-C with the IDE

[link text]https://www.b4x.com/android/forum/threads/m5-stick-c.125286/(link url)

Hello everybody,
if someone is interested in a basic programming environment IDE .... see here...
[link text]https://www.b4x.com/b4r.html(link url)
i have been using them for a while and i think they are very good

greetings michael

@plusulli said in Where can I order from Germany fastest in the M5Stack Store.:

https://www.tinytronics.nl/shop/en
super schneller Service ..Bestellung war innerhalb von 2 Tagen da !!!

Hi,
is there any File (Kicad/Eagle) with drawing (m-Bus ...holes..etc) that can be use as a template for custom pcb ?

best regards
Mike

ok...i find out that i have to use SoftwareI2c and the i2c device must have pullup resistors:

#include "SoftwareI2C.h"

SoftwareI2C softwarei2c;

void setup() {
Serial.begin(115200);
softwarei2c.begin(26, 32); // sda, scl
Serial.println("begin to scan...");
}

void loop() {
for (unsigned char i = 1; i <= 127; i++) {
if (softwarei2c.beginTransmission(i)) {
Serial.print("0x");
Serial.println(i, HEX);

        while (1);
    }
    softwarei2c.endTransmission();
}

Serial.println("find nothing");
while (1);

}

Hi all,
i'm playing with the mpu6886, with the Arduino lib i can read it.
how can i use the "grove" connector (g26,g32) with a i2c device at the same time?

thx Michael