Hi Adam,
I am french living in Zurich and interested in dIY stuff I own 2 3d printer and having 2 that are dust trap (one is broken ( a crap m3d printer micro...not repaire-able ) but ok... I design more than 70 opensource design to be 3d printed.... I have assembled a nerdy gurdy for which I designed additionnal thingiverse models... I am active on the prusa community forum... I wanted to programm a xyz accelerometer export to enable easy instant shaping...

DR_Froggy_rD
@DR_Froggy_rD
3d printing hobbyist actively designing stuff.. I own a prusa mini and an easythreed x7I owned a micro3d plus printer which is dead now.. (sadface) cannot make it work again... I have a velleman K8200...
I have a Ph D in science and I am a martial artist. I survived a health accident and I am almost back to normal.
I wad looking for a solution to A) read the extruder motor input of the prusa mini to run another extruder. as a direct drive instead. I have bought an extra extruder from easythreed in order to do that at some point and B) I want to tune my printer using instant shaping: for that I need a accelerometer that can measure vibration of the printer: therefore M5 stack coimes probably as a good idea...
Best posts made by DR_Froggy_rD
-
RE: Members Introductions aka The Icebreaker discussion.
-
RE: 2023 December Community Challenge.
I am not sure if you are serious or trolling me
-
RE: UiFlow 2.0 discuss(how-to, bug, feature request or sometings)
Hi there,
I tried to do something but uiflow2 is somehow confusing:
I was able to burn uifllw 2.0 on my atom s3 thank to adam!
Now I wanted to play with it: so I changed the bacground colour! this worked.
Now I was looking to other option as he one found for the stick C plus (IMU and so on) but those arenot available for the atoms3...
the second picture is from uiflow where all hardware options are listed... even the remote + options which is very promissing to me if I achieve that. but I cannot delete all at once...I cannot see the end of the window so I cannot delete everything...or clear to start from scratch on microsoft edge...
boring somehow -
RE: Members Introductions aka The Icebreaker discussion.
I found you and let you a comment on your atom choacker building block
-
job_repository
creating a special forum subpart for small_jobs from community to the community...
-
RE: 2023 December Community Challenge.
@trini-cobra I know the feeling- I want to do something simple but I cannot get it working. I was able to upload the firmware after two weeks with the aid of ajb2k3. and because they updated the burner and uiflow
but then I could start playing with the background colour of the lcd
Latest posts made by DR_Froggy_rD
-
how o work with pdm microphone
Hi there, I cannot understand why pdm microphones cannot be used with a PA Hub. connected to a atom S3. would it be better with a pb Hub? instead?Have an idea?
-
RE: PAHub revival
if anyone can help me there: how can I get Multiple Pdm unit being connected with a hub to a atom s3?
-
RE: PAHub revival
It is what I meant you cannot choose PA. HUB_0 as Port for the second PAHUB -
RE: PAHub revival
So I have an apology to do. It was probably not working because I was trying with a PDM when I tried with a TOF it worked... somehow.
However when trying to put a second Pahub in daisy chaiin It is not so I believe doing it first in blockly then in Python copying modifying should work. But when adding a second Pa Hub as Pa HUB 1you cannot choose PaHUB_1 / channel _0 to 5. -
PAHub revival
Re: Pa hub
Hi there,
Just revisiting the PA Hub story. I felt like breeing cheated by M5Stack because It is far from reaching the promisses.
For me the problem is the tutorial videos showing something when you try to reproduce this is not working.
look at M5Stack PAhub Unit - Connecting multiple i2c Devices.
Luke is choosing the TOF sensors only and magically the Pa Hub port are there. but by which magic? after adding some labels... but why?
I tried it there https://flow.m5stack.com/
Old address still working though. -
RE: help needed to get started.
@M5Stack team: I am looking for any ressources / tutorials on how to use remote+ in uiflow. I do not find any project on hackster.io. please provide a test case tutorial sothat people may use the graphical interface...
Has anybody used it successfully? -
job_repository
creating a special forum subpart for small_jobs from community to the community...
-
RE: M5stickC plus as a remote vibration sensor (using uiflow and remote function)
still nobody... to gve an hint...
I have uploaded the m5file document on hackster.io.
PLease help me...
https://www.hackster.io/DR_Froggy_rD/trying-to-get-stickc-as-vibration-dataloger-for-3d-printer-09ac41 -
RE: M5stickC plus as a remote vibration sensor (using uiflow and remote function)
@Anybody-
I tried to get stick C plus to run it but the uiflow says api key null
boring -
RE: M5stickC plus as a remote vibration sensor (using uiflow and remote function)
@m5stack
sad to see no answer/ no suggestion here