m5stickc plus 2 cannot be flashed
-
I bought m5stickc plus 2 quite recently, I started testing different firmware, first marauder, then decided to download nemo, but after installing nemo, the screen stopped going out, and now when connecting and trying to flash it, it gives an error
etc Jul 29 2019 12:21:46rst:0x1 (POWERON_RESET),boot:0x3 (DOWNLOAD_BOOT(UART0/UART1/SDIO_REI_REO_V2))
waiting for download
And also writes: you must log in before using this firmware
please help me, I have not found any information about this anywhere, and I do not have special programming skills ((( -
Open M5Burner, log in to your M5stack account, pick M5StickCplus2 latest firmware, choose right com port press burn, or you can do erase and then burn.
-
@robski Thanks, it helped
-
im trying to flash but it keeps saying this
Detecting chip type...
ESP32
Chip is ESP32-PICO-V3-02 (revision v3.1)
Features: WiFi, BT, Dual Core, 240MHz, Embedded Flash, Embedded PSRAM, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: 14:2b:2f:b2:0b:14
Uploading stub...Note: If issues persist, try installing the WCH USB-to-Serial MacOS driver.
A fatal error occurred: Failed to write to target RAM (result was 01070000: Operation timed out)
-
@bbarker23 well, have you tried installing the driver?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login