Posts made by liushasha

Hi,
Its might caused by the 'windows defender' set at a high-security level. Try to lower the security level.

At the top item unselect forbidden to warning.

Do you use RFID unit or base

https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Unit/RFID/Arduino

@mati said in Windows M5Burner Proxy support:

proxy

Its not easy to add a Proxy support, in this situation you can try to download easy loader on the documentation page.

@rob-biernat
PH2.0

https://item.taobao.com/item.htm?spm=a1z10.3-c-s.w4002-21223910208.112.64e66a4bJ99Q2L&id=522578768957

Hi，
Sorry，It's not available on uiflow yet.

Hi,
M5StickC schematic is not permitted to be open source yet, maybe later. We have offered the block diagram on the back sticker of the device, include all components and pin layout. Do you think those info is enough ?

Link: https://business.facebook.com/groups/m5stack/
Welcome on board! Ask questions, share your M5 projects, engineering communications all in here ！ Come join us.

📣Make，Share and Win M5Stack Face Contest!🏆Bring your cool project to the M5Stack community!

🔩HARDWARE：M5Stack Face Devkit, for contest attendees who still don't have a Face, Sign up here to get a discount coupon 👉https://zurl.co/dKoo 👈

🎁PRIZE

• Top prize $300 Gift Card.
• Every participant gets a free Face Module to choose from RFID/ Finger/ Encoder/ Joystick

✴️DETAILS
1, Get your Face devkit and make a project.
2, Write your project blog on Hackster Channel: https://www.hackster.io/m5stack, share it to social media and tag #M5Stack
3, Project with most votes wins. Judges are M5Forum members.
4, Contest takes 40 days long, the winner will be announced by 15th-Aug.

@grelm Does DS18B20 have a unique address to identify the 6 sensors if they don't have an address, or they share the same address you can not expect reading correct data from them, they will have conflicts by wiring them all to one G26 pin.

Thanks for sharing. Smart !!

@iPodLux Here is a video tutorial on UIFlow MQTT https://www.youtube.com/watch?v=5RozKI-3i4Q&t=101s

Sorry, the structure inside the device is totally fixed. It is not easy to disassemble it and keep the hardware good. Instead of charging the hardware side, do you prefer to program the power management IC and change the power supply priority? Details refer to the AXP192.

Thanks to M5 user Brad from the USA, he found out if move the M5Burner.exe file into the APP folder, it is able to open up normally. For those who have problems using M5Burner on Mac, please try out this way.
If there are still some problems, please give us feedback on this Topic. Thanks in advance.

I want to give a shout-out to Brad, who find out the way to run M5Burner.

@hetzer Hi, thanks for your feedback, the block naming on IMU is misleading. get-x get-y get-z actually is Yaw, Pitch, Roll.

M5burner has found compatible problems on Mac, as well as UIFlow desktop IDE. We appreciate the feedback from the users, and We apologize for the inconvenient. The R&D department team of M5Stack is now working on it. Before we have this problem fixed, if you have trouble downloading the firmware, you can use 'esptool'. Here are the steps:

1, Make sure you have 'esptool' installed on your Mac. Tutorial website:
https://github.com/espressif/esptool

2, To check if have 'esptool' installed: type command esptool.py , in 'terminal'. If a display showed this, means it is installed.

3, Download uiflow-firmware: https://github.com/EeeeBin/UIFlow-Firmware , unzip.

4, At 'terminal' find directory locate directory to '.../UIFlow-Firmware-master/firmware_en'

5, Connect m5stack device via USB cable. Go inside the folder type in command ./flash.sh to start flahing

Sure

M5burner has found compatible problems on Mac, as well as UIFlow desktop IDE. We appreciate the feedback from the users, and We apologize for the inconvenient. The R&D department team of M5Stack is now working on it. Before we have this problem fixed, if you have trouble downloading the firmware, you can use 'esptool'. Here are the steps:

1, Make sure you have 'esptool' installed on your Mac. Tutorial website:
https://github.com/espressif/esptool

2, To check if have 'esptool' installed: type command esptool.py , in 'terminal'. If a display showed this, means it is installed.

3, Download uiflow-firmware: https://github.com/EeeeBin/UIFlow-Firmware , unzip.

4, At 'terminal' find directory locate directory to '.../UIFlow-Firmware-master/firmware_en'

5, Connect m5stack device via USB cable. Go inside the folder type in command ./flash.sh to start flahing

@ajb2k3 Thank you, very helpful information!

@ajb2k3 Is there anybody could tell who has tried to open up the app file from contents? the pic just demonstrates you how to open up an app file inside contents.