Posts made by blackfigcurrant

When it comes to setting up that specific size/location window for the M5Stack Core S3 camera, samples can be a lifesaver!

If you're stuck with that "AssertionError," double-check your SPI initiation settings, and try to troubleshoot step by step.

The Core2 with the M5GO Battery Bottom2 is a sweet combo! As for the Rx pin on PORTC, it's essential to check the specs to be sure about that 5V compatibility.

When it comes to the CoreS3, the 9-24V DC circuit mentioned in the specifications might not be present on the schematic you're looking at.

you're all set with those colors! They should do the job just fine.

You might need to use custom blocks or tweak some settings to get that module up and running with UiFlow 2.

For Core1, Core2, and CoreS3 versions, GPIO 22-27 and GPIO 32 are free. GPIO 20 on Core1 and Core2 is used. GPIO 28-31 are unused. GPIO 40-48 are not on Core1/Core2 but are used for Camera on CoreS3. GPIO 19/20 on CoreS3 are used for USB.

Try checking if the zip file is properly formatted and all the required files are included. Sometimes, a small glitch can cause unexpected errors.

So, to scan nearby devices via Bluetooth with Core S3, you gotta go to the settings and click on the Bluetooth option. Once you're there, just tap on the "Scan" button, and your Core S3 will do its thing and find all the devices chilling nearby.

You can find all the juicy documentation and functions for UI Flow in the Help section of the app. Just navigate your way there.

@mtylerjr It's true, the setup for the S3 products is quite different from the pre-S3 ones, but it's exciting to explore the potential they offer