New user having trouble with "download" mode (Atom Lite S3)
-
Well, I'm stuck at about as basic a point as is possible. Got a new Atom Lite S3. Connected to Windows 10, it appears in Device Manager as USB JTAG/serial debug unit.
Now I want to flash a firmware with m5burner, but I'm doing it wrong. I hold the reset button, the green LED comes on, I release the button and the LED goes off. Click "burn" --> "get mac failed." Tried different sequences of this and always the same result.
Any help appreciated!
-
@mentholmoose is it detected in M5Burner - do you see comX popup in the corner when device usb is plugged in? are you also logged in to your account in M5Burner - you will have to bind device in to your account at some point
-
@robski - got it solved, turns out the problem was that i was connecting to usb-c on my laptop, which didn't seem like it should be a problem since the Atom Lite also uses usb-c. But once i changed over to my usb-a port, it's all working fine.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login