Problem speaker with M5stickC Plus

[vgamlc]

I am using M5stickc plus at the moment I am very happy with them, but I have had a problem and I cannot find a solution.
I am unable to make a beep sound and I am not listening because, I am attaching the code to see if they can help me.

ERRROArduino:1.8.13 (Windows 10), Tarjeta:"M5Stick-C, Default, 1500000, None"
C:\DISEÑOS\Arduino\sketch_nov25b\sketch_nov25b.ino: In function 'void loop()':
sketch_nov25b:51:8: error: 'class M5StickCPlus' has no member named 'Speaker'
exit status 1
'class M5StickCPlus' has no member named 'Speaker'

Thanks in advance.

#include <M5StickCPlus.h>
#define INTERVALO_LED 200
#define INTERVALO_LECTURAS 1000

uint8_t i = 12;// entre 7 y 12
unsigned long tiempo;
const int Led = 10;
unsigned long Tiempo_Led_Encendido = 0;
unsigned long Tiempo_entre_Lecturas = 0;

void setup() {

Serial.begin(115200);
// put your setup code here, to run once:
M5.begin();

pinMode (Led, OUTPUT);

digitalWrite (Led, HIGH);

M5.Lcd.setRotation(1); //Rotar LCD
M5.Lcd.fillScreen(BLACK); //Vaciar pantalla y color
M5.Lcd.setTextColor(WHITE); //Color Texto
M5.Lcd.setTextSize(2); //Tamaño Texto
M5.Axp.ScreenBreath(i);
}

void loop() {

M5.update(); // need to call update()
if (millis () > (Tiempo_entre_Lecturas + INTERVALO_LECTURAS))
{
M5.Lcd.fillScreen(BLACK); //Vaciar pantalla y color
M5.Lcd.setCursor(0, 0);
M5.Lcd.printf("V_Bateria: %.2fV\r\n", M5.Axp.GetBatVoltage());
M5.Lcd.printf("I_Bateria: %.1fmA\r\n", M5.Axp.GetBatCurrent());
M5.Lcd.printf("V_USB: %.3fV\r\n", M5.Axp.GetVBusVoltage());
M5.Lcd.printf("I_USB: %.3fmA\r\n", M5.Axp.GetVBusCurrent());
M5.Lcd.printf("Vin: %.3fV\r\n", M5.Axp.GetVinVoltage());
M5.Lcd.printf("Iin: %.3fmA\r\n", M5.Axp.GetVinCurrent());
M5.Lcd.printf("Bat power: %.3fmw\r\n", M5.Axp.GetBatPower());
M5.Lcd.printf("Nivel: %u\r\n", M5.Axp.GetWarningLeve());
Tiempo_entre_Lecturas = millis();
}
if(M5.BtnA.wasPressed())
{
digitalWrite (Led, LOW);
Serial.println("Pulsado A");
M5.Axp.ScreenBreath(i++);
M5.Speaker.beep();//////////*****///////
if (i > 12) i = 7;
Tiempo_Led_Encendido = millis();
}
if (!digitalRead(Led) & (millis () > (Tiempo_Led_Encendido + INTERVALO_LED)))
{
digitalWrite (Led, HIGH);
// M5.Speaker.setBeep(900, 1000);
}
}

[felmue]

Hello @vgamlc

I think the correct function to call is: M5.Beep.beep();.

Cheers
Felix

[vgamlc]

Thanks, you are a machine and fast.

[vgamlc]

Another issue, I cannot change the volume on my M5stack Plus. Some help?

[felmue]

Hi @vgamlc

I don't think you can change the volume of the beep. Although there is a setVolume() function the volume is only used in the PlayMusic() function, but not for the beep.

Please also refer to the Speaker source code

Thanks
Felix