Have you installed the device drivers Xcode (from the App Store) and Python 3?

@yu_with_a_mission said in M5Burner does not work in MacOX 12.3.:

@yopita
I tried you way and get another error,
"File"/Applications/M5Burner.app/Contents/Resources/packages/tools/serial/tools/list_ports_osx.py", line 32, in <module>
kIOMasterPortDefault = ctypes.c_void_p.in_dll(iokit, "kIOMasterPortDefault")
ValueError: dlsym(RTLD_DEFAULT, kIOMasterPortDefault): symbol not found

=================
Burn Failed
================="
How can I solve?

System:
MacOS Monterey 12.4
Device:
M5StickCPlus

There is an Issue Montery.
Have you installed Xcode from the App Store?
Have you instilled the latest Python 3 from the python site?
Have you installed the drivers?
Have you set the PATH variable correctly?
Have you copied the M5Burner V3 to the Applications folder?
Have you erased the controller first before writing the correct firmware?

Web UI Flow V1.4.5 (latest) and Firmware v1.9.8-core2 (latest)

@drjakob Check which USB driver is in the new cores as the driver chip was changed due to the part shortage.

This is on a Core2

@slartibartfast Hate to bump an old topic but this is a problem for me still. The "Original Network Function" blocks place the calls to the wlan class correctly but they don't actually work. This is UIFlow 1.9.6 now. It makes it impossible to use the program except in the coverage area of the SSID hard coded into the program.

For a workaround, you can manually relocate the call to doConnect inside the loop or function where you want it. You can save that, and when you upload the program to the device it seems to send the modified python.

@ajb2k3 Thanks for the information but I did this over the M5Burner. My AtomDTU is up to date. With the 1.9.4 it works like expected.

offline mode does not work because the desktop side is out of date.

Just now, I have confirmed it to be downloadable.

Thanks!

It could be the pins are wrong, The IR is on GPIO9 and the red on gpio10.

Now it works again for some time.

0_1645861240306_769c224a-234e-4993-954b-4d38392aa63c-image.png

Closed.

Hello,

i can confirm that touch is now working with firmware 1.9.2 in battery mode. Thanks @all for the help.

@tenebrous

embarrassed...

Thanks for your report, it can help us be better.

Have a nice day.
IAMLIUBO

Same problem for me, losing all my timers :(

0_1644145406612_5c98c2af-df3a-4c32-bd90-bafb03cfb300-image.png

0_1644145384052_1c8edf7f-4547-48c0-bde5-f70167373008-image.png

@wkibler you need to make this offer direct to M5STACK. I have been pushing and teachers have been asking but if you make a finical offering they that could tip the scales into getting one.
I asked for a RpI based private host.