Topics created by StarLog

@starlog In Arduino IDE it is easy to do:
upload any sketch and the check the upload stream (the bottom of the IDE) by scrolling back up to the start.

Sketch uses 243709 bytes (7%) of program storage space. Maximum is 3145728 bytes. Global variables use 19348 bytes (5%) of dynamic memory, leaving 308332 bytes for local variables. Maximum is 327680 bytes. esptool.py v4.5.1 Serial port /dev/cu.usbmodem101 Connecting... Chip is ESP32-S3 (revision v0.1) Features: WiFi, BLE Crystal is 40MHz MAC: 68:b6:b3:22:4c:6c Uploading stub... Running stub... Stub running... Changing baud rate to 921600 etc.

Hello @StarLog

you can find it here.

Note: There is some confusion about the filename. LED_Display.h vs. LED_DisPlay.h.

Under Windows it doesn't matter, but under MacOS or Linux it does.

Thanks
Felix

in the first image, the number is red which means that the core is not connected uiflow and so unable to be programmed. uiflow programs over wifi unless you have google chrome which may have a working webs plugin.

Did you select the correct core and type the correct API key into UIFlows settings?
Does the API code appear in green at the bottom left of UIFlow?