@Rayesyaango
Yep, that is why i prefer Apps instead of cloud solutions, now weekend so plenty of time just looking at a Core2 and doing ... nothing.
Can't login can't acces my programms, going to check my tv...

@Coopersmith-24601
The switches are very simple, just look at the text on the circuitboard of the 868 v1.1 (both sides!)
One 1 side you see a table with pins that can be used for Core, Core 2 and Core S3, some connections like miso mosi and clk are fixed so you only see the pio numbers that you will have to use in your code.
Other signals like CS (btw here called NSS), IRQ and RST give you some options.
On the side where the 8p dipswitch is located, you make in the selection block for these 3 variable connections only 1 choice active by moving the white pin to the ON position.
So in the blok of NSS 1 switch will be on all others will be in the off position!.
Same for the IRQ block and the RST blok.
In case of a Core 2 moving switches 4, 6 and 8 to ON will select NSS = 0, IRQ = 35 and RST = 25.
These values are the values you will have to use in the setup of the LoRa module

@guarthur
Just try these module in uiflow1
I have core-2 ,m5stickC and m5stickC Plus and an external IMU and a env PRO module
Used them all with the same blocks in uiflow2 and uiflow1, Core-2 no problems at all.
The sticks only work with these sensors in iuflow1.
using the sticks with uiflow2 gives an i2c error (during uploading a red line flashes fast in a window) and the modules are not found, doing i2cscan returns an empty list.
in uiflow 1 the modules work and i2cscan gives the correct i2c adresses
M5stack makes beautiful hardware and shitty software. Thinking now of throwing all these junk just in the electronic recycle bin.

@Rayesyaango
Yep, that is why i prefer Apps instead of cloud solutions, now weekend so plenty of time just looking at a Core2 and doing ... nothing.
Can't login can't acces my programms, going to check my tv...