The PM2.5 module is new and is labled with PMSA003 as far as I could find information it would be the SHT30.

I also can't find that it wasn't connected correctly. It was pushed all the way in and secured with screws.

I wanted to run the PM2.5 Module on my Core Basic.
But whenever I try to start it it displays the erroe:

SHT30 Sensor maybe not connected.

Under Details it shows the following, see picture belwo:

Version Log:
Core Basic: V1.13.2
UIFlow: V1.13.2

Both USB are connected so power should be plenty.

Didanyone experience the same behaviour?