M5StickV Firmware_1022_beta Upgrade

[ajb2k3]

@xeon said in M5StickV Firmware_1022_beta Upgrade:

@thrasher https://www.sdcard.org/downloads/formatter/
try this.

i prefer using a high quality SD since i hacked my first psp.
I learned fast a good SD card saves money later.
i got a supplier that gets me bulk sd cards at a huge discount.
All of them Samsung Class 10 UHC1 and above.
they just last longer because i tend to put SD cards thru hell in elaborate builds.

I'm using 32GB Toshiba cards that are Class 10 UHC 1 as I got them on discount however I am yet to program my stickV as I can't get Kflash GUI to work.

[Xeon]

@ajb2k3 said in M5StickV Firmware_1022_beta Upgrade:

@xeon said in M5StickV Firmware_1022_beta Upgrade:

@thrasher https://www.sdcard.org/downloads/formatter/
try this.

i prefer using a high quality SD since i hacked my first psp.
I learned fast a good SD card saves money later.
i got a supplier that gets me bulk sd cards at a huge discount.
All of them Samsung Class 10 UHC1 and above.
they just last longer because i tend to put SD cards thru hell in elaborate builds.

I'm using 32GB Toshiba cards that are Class 10 UHC 1 as I got them on discount however I am yet to program my stickV as I can't get Kflash GUI to work.

Why?

[ajb2k3]

@xeon said in M5StickV Firmware_1022_beta Upgrade:

@ajb2k3 said in M5StickV Firmware_1022_beta Upgrade:

@xeon said in M5StickV Firmware_1022_beta Upgrade:

@thrasher https://www.sdcard.org/downloads/formatter/
try this.

i prefer using a high quality SD since i hacked my first psp.
I learned fast a good SD card saves money later.
i got a supplier that gets me bulk sd cards at a huge discount.
All of them Samsung Class 10 UHC1 and above.
they just last longer because i tend to put SD cards thru hell in elaborate builds.

I'm using 32GB Toshiba cards that are Class 10 UHC 1 as I got them on discount however I am yet to program my stickV as I can't get Kflash GUI to work.

Why?

KFlash GUI just starts then shuts down strait away

[ajb2k3]

kflash_gui ; exit;
Traceback (most recent call last):
  File "kflash_gui.py", line 5, in <module>
  File "<frozen importlib._bootstrap>", line 983, in _find_and_load
  File "<frozen importlib._bootstrap>", line 967, in _find_and_load_unlocked
  File "<frozen importlib._bootstrap>", line 677, in _load_unlocked
  File "/usr/local/lib/python3.7/site-packages/PyInstaller/loader/pyimod03_importers.py", line 627, in exec_module
  File "paremeters_save.py", line 6, in <module>
  File "/usr/local/Cellar/python/3.7.3/Frameworks/Python.framework/Versions/3.7/lib/python3.7/locale.py", line 568, in getdefaultlocale
  File "/usr/local/Cellar/python/3.7.3/Frameworks/Python.framework/Versions/3.7/lib/python3.7/locale.py", line 495, in _parse_localename
ValueError: unknown locale: UTF-8
[726] Failed to execute script kflash_gui
logout
Saving session...
...copying shared history...
...saving history...truncating history files...
...completed.

[Thrasher]

@Xeon @ajb2k3
I have sundisk extreme cards and samsung pro ones from my camera and dji phantom, so they are 100% legit but stickv wont recognize em. I went to cheaper ones and still had no success (i think it was kingstones) so I found old 1gb one in my stash from some old hardware and it worked fine until last firmwares. I saw someone else expierencing same problems here

[pnnato]

Can anyone make the SD XC-typed card work with exFat format?

[ajb2k3]

@pnnato I don't think exfat is supported by any electronic device.

[pnnato]

@ajb2k3 Wow. such a quick reply. Thanks.
At first, I just couldn't format my SD card to FAT32 using Windows, but I found another solution using software like "MiniTool Partition Wizard" to change exFat to FAT32. And boot.py can work now.

[ajb2k3]

@pnnato If all else fails use the sd formatter from https://www.sdcard.org/downloads/formatter/

[m5stack]

@thrasher hi , maybe because the model file too big. you could use V-Training serve to Training a new Model ， then will be solve