StamPLC: Replace RTC battery?
-
Can you replace the RTC battery of StamPLC, if it is end-of-life?
-
Hello @nvko23
after opening my M5StamPLC I found that the RTC battery is located at the underside of the CPU board. It is soldered to the board. So yes, I'd say it is replaceable, but the proper soldering tools are required.
BTW: the RTC battery in my M5StamPLC seems to be completely flat as I measure 0 volts.
Thanks
Felix -
@felmue said in StamPLC: Replace RTC battery?:
Hello @nvko23
after opening my M5StamPLC I found that the RTC battery is located at the underside of the CPU board. It is soldered to the board. So yes, I'd say it is replaceable, but the proper soldering tools are required.
BTW: the RTC battery in my M5StamPLC seems to be completely flat as I measure 0 volts.
Thanks
FelixThank you so much
-
@felmue said in StamPLC: Replace RTC battery?:
Hello @nvko23 solitaired
after opening my M5StamPLC I found that the RTC battery is located at the underside of the CPU board. It is soldered to the board. So yes, I'd say it is replaceable, but the proper soldering tools are required.
BTW: the RTC battery in my M5StamPLC seems to be completely flat as I measure 0 volts.
Thanks
FelixGreat, thanks you very good
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login