COMX LTE and Adafruit_FONA.h
-
Hi All, I would like to play with COMX LTE and Core1 to control my stove with SMS..
all the sketches I found use Adafruit_FONA.h, but I don't know which pin I have to assign for RST...some tips?
best regards
-
@cepics The RST pin assignment for COMX LTE (SKU:M031-A) is not provided in the materials. However, since the module uses AT commands for control (via UART 115200bps), you may not need a dedicated RST pin connection if using software reset via AT commands (e.g., AT+CFUN=1,1 to reset the module).
For Adafruit_FONA compatibility, if a hardware RST is required, you can connect an unused GPIO pin from Core1 (e.g., G2) to the module's RST pin (refer to the module's schematic for exact RST pin location, typically labeled "RST" or "RESET" on the PCB).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login