M5StickC Plus2 crash when Button State call

restart-au

Hello together,
I'am using the M5StickC Plus2 with the Rover.
I have an issue when trying to implement the Button state.
Whenewer I have other other Code in the loop() besides the StickCP2.update()
and the If(StickCP2.wasClicked()) the Controller is crashing. Here I wrote a simple Firmware:

#include <Arduino.h>
#include "M5StickCPlus2.h"
#include "M5_RoverC.h"

void setup()
{
    Serial.begin(9600);
    Serial.println("Startup");
    auto cfg = M5.config();
    StickCP2.begin(cfg);
    StickCP2.Display.setFont(&fonts::Orbitron_Light_24);
    StickCP2.Display.setTextColor(GREEN,DARKGREY);
    StickCP2.Display.print("Startup");
    delay(100);
}

void loop()
{
    StickCP2.update();

    Serial.println("Battery Test Start here!");
    int vol = StickCP2.Power.getBatteryLevel();
    StickCP2.Display.clear();
    StickCP2.Display.setCursor(StickCP2.Display.width()/2, StickCP2.Display.height()/2);
    StickCP2.Display.printf("%d \%", vol);
    
    if (StickCP2.BtnA.wasClicked())
    {
        StickCP2.Display.clear(DARKCYAN);
    }
    delay(50);
}

I Only see the the BatteryLevel and then the screen gets dark and it restarts.
Serial Output is:

Rebooting...
�R��RgRStartup
Battery Test Start here!
Guru Meditation Error: Core  1 panic'ed (LoadProhibited). Exception was unhandled.

Core  1 register dump:
PC      : 0x400d2312  PS      : 0x00060a30  A0      : 0x800db9e4  A1      : 0x3ffb2270  
A2      : 0x00000000  A3      : 0x3ffc2804  A4      : 0x00000064  A5      : 0x00000004  
A6      : 0x3ffb8188  A7      : 0x80000001  A8      : 0x800d2310  A9      : 0x3ffb21d0  
A10     : 0x00000004  A11     : 0x416778b6  A12     : 0x416778b6  A13     : 0x3ffb220c  
A14     : 0x3ffc2b70  A15     : 0x3ffb220c  SAR     : 0x0000001b  EXCCAUSE: 0x0000001c  
EXCVADDR: 0x00000016  LBEG    : 0x400867e0  LEND    : 0x400867f6  LCOUNT  : 0x00000000  


Backtrace: 0x400d230f:0x3ffb2270 0x400db9e1:0x3ffb2290




ELF file SHA256: 706bf00c17c9ca5e
```
The Button Example for the StickC Plus 2 works fine. Also, when I remove everything else from the loop except the `Update` and the check for a Button action.

I am Using Visual Studio Code and PlatformIO with the Arduiono Framework.