Offline mode in UIflow (StickC Plus2)
-
I'm new into M5Stack world.
I received the stick with a demo program. So I used M5burner to install UIflow. My first surprise was that M5burner decided to use WiFi instead of ttyACM0 to download the firmware.
Once completed, I used Configure to set StartMode to USB.
I downloaded UIflow-IDE and installed it on Linux host.
I boot the stick and set mode to USB and then I start IUflow-IDE. The status bar display "ttyACM0". After a few seconds the status bar display "Disconnected" in red and a message box show: "Upload code failed, maybe your device is offline ...".Sometimes, on the console, I see:
"[Error: Error Ressource temporarily unavailable. Cannot lock port]
I checked and I have the appropriate privileges to use (r/w) the serial port.Questions:
- 'offline' in the messageBox. What does it refer to?
- Is it possible to use UIflow with WiFi?
- How can I fix my problem?
Thanks for any help
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login