M5 Stick C Plus wont power on, but COM port exists
-
I left a speaker hat attached to an M5 StickC Plus, I'm not sure that's affected anything, but it seems to have drained the battery and now I cannot get it to power on.
To fix it I have tried:
[1] Attaching it to a PC via a USB cable. The COM port appears, I cannot upload code to it via the Arduino IDE. I get "Failed uploading: uploading error: exit status 2"
[2] Using M5 Burner. When I attach the M5 Stick M5 Burner reports that it has "Found new device". However, I can't flash it via M5 Burner and I can't erase it via M5 Burner. When I try it says "A fatal error occurred, the COM port doesn't exist"
[3] I have left it attached to 2 different chargers for 1 hour + each. Still no charge.
[4] I have tried attaching 3 x AA batteries to the 5v In and GND pins on the top header row. No change.
Is it completely dead? Any thoughts on what I can do to get it going again?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login