Can't program M5Stack Core2 with USBv1.2 module, wrong boot mode detected 0x17
-
Hi,
Using Arduino IDE I am able to program hello example program with M5Stack Core 2 for AWS and M5GO Bottom2 for AWS connected.
However, with M5Stack Core 2 for AWS and USB v1.2 module. I get error "Failed to connect to ESP32: Wrong boot mode detected (0x17)! The chip needs to be in download mode".
How do I solve this problem?
Regards,
Markel -
The cause of the problem is that I selected GPIO0 as SPI slave select at USBv1.2 module.
Regards,
Markel -
It still happens. Any permanent solution to the problem>
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login