AtomS3 0.85" OLED unable to wake from buttom
-
Recently tried using the AtomS3 with 0.85" OLED for a CAN-bus project and it seems like a missed opportunity to not have the (only) button under OLED connected to a pin that support waking up the ESP.
Is there an easy workaround for this?
I would also have to find a way to put the isolated CAN bus base to sleep to make this project viable with M5Stack products so I guess odds are I'll have to make my own, but I would be nice if new products were designed with deep sleep and power saving in mind.
-
@notsonominal G41 is the input from the button into your program.
You can read that button and do whatever your program needs, even transfer the input directly to an output.
:) -
@teastain but G41 isnt supported as a wake-up pin from deep sleep - when the AtomS3 has a ton of free pins this seems like something that could be adressed in a future revision to make the product more usable.
-
I'm not able to get
https://docs.m5stack.com/en/atom/Atomic CAN Base
to work with the AtomS3, immediatelyTWAI_ALERT_ERR_PASS, TWAI_ALERT_BUS_ERRORhttps://docs.m5stack.com/en/unit/can
works, though.
What CAN library did you use? With what pin definitions?Thanks in advance!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login