Atom Lite inconsistent data being sent
-
I am using the ADC function of the Atom Lite to convert an analogue voltage signal from a pressure transducer as part of my water tank monitoring solution in Home Assistant. The data being received by HA from the Atom Lite is VERY inconsistent. If I test the voltage signal being sent from the transducer with a multimeter it is steady at .531 volts, however the data being sent to HA from the Atom Lite varies in the order of + or - 50%.
Has anybody else experienced a similar issue and if so how did you resolve it? Could it be that my Atom Lite board is faulty or is it within normal tolerances for the signal to vary so widely?
I have another Atom Lite module on order so will see if the same happens with it. In the interim I welcome any suggestions.
-
@bstafford the on-board ADC of the ESP32 is notoriously inaccurate!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login