MQTT connection of CORE2 with UIFlow.

[ikabou]

Hello,
I've installed UIFLOW (CORE2) V1.6.5.1.
When I make an MQTT connection with Blockly programming, it is
overwritten on the "Wi-Fi Connect Core2" screen.
Is there a way to avoid it?
The publish will be correct.
Thank you.

[world101]

I think your issue is similar to this one...
https://community.m5stack.com/topic/2435/wifi-connect-layer-still-shown

I have the same issue as well. I didn’t realize this was related to MQTT, which I use in my Core2 program.

@m5stack, please note this bug and see if you can fix it.

By the way, for me it only happens when I download the program to the Core2. When pressing the Run button in uiFlow, I do not see the graphics issue.

[ikabou]

This post is deleted!

[ikabou]

@world101

Yes. Only when downloaded.

Occurs with "screen" followed by "m5mqtt" in Python's auto-generation.

--- Blockly ---
screen = M5Screen ()
screen.clean_screen ()
screen.set_screen_bg_color (0xFFFFFF)
m5mqtt = M5mqtt ('','*. *. *. *', 1883,'','', 300)
...

Rewritten with Python I overwrote the "Wi-Fi Connect Core 2" screen and erased it.
--- Python ---
m5mqtt = M5mqtt ('','*. *. *. *', 1883,'','', 300)
screen = M5Screen ()
screen.clean_screen ()
screen.set_screen_bg_color (0xFFFFFF)
...

However, it is strange that the "Wi-Fi Connect Core2" screen is displayed with "m5mqtt".

[Zontex]

Hi Guys, I noted this bug and will look into it. Will try to re-produce it and see what's going on

[ikabou]

@zontex

I am grateful for your prompt handling.

[Zontex]

@ikabou Bug confirmed and reported, we will release a fix in the next update.