@barky919 said in M5Stack Gray reboots when USBC power removed:

Thank you, will try today.

it works??

Gpio 26,Gpio 22, Gpio 21, Gpio16, Gpio17 Gpio 5 Gpio 2 could all be used, What are you trying to control with those pins? Could it be that you are drawing too much power? I tried to drive some heavy duty servo's before and the M5Stack would crash.

Thank you for pointing me in the right directions, i had some issues with Azure not working as a normal MQTT hub, but more of an individual messaging system for devices... but after getting access tokens etc aligned it all works from micropython.

@mati said in Windows M5Burner Proxy support:

@lukasmaximus well this is a issue only in proxy restricted networks. So its non critical or blocker.
Its could be add to considering in next MBurner sprint.

Thx for reply Lukas

A proxy restriction network? Would installing a VPN service not be better?

The sensor had a problem.

Used another GY-91 and it works now.

Scanning...
I2C device found at address 0x68 !
I2C device found at address 0x75 !
I2C device found at address 0x76 !
done

@cepics Nope looks like no one is around at the moment with knowledge that you need.

No to mention that the team were over in japan.

Hi @toddkrein I will try and track down the source code for you. Unfortunately there is a habit in our company of posting videos without a lick of information and without attribution. In the meantime maybe these projects might suit your use case

Nixie Tube Watch Simulated on ESP32 Using the M5Stick - Hackster.io
https://www.hackster.io/.../nixie-tube-watch-simulated-on-esp32-using-the-...

StickCWatch (Chinese only)
https://github.com/eggfly/M5StickCProjects

It would be cool to see some sort of stat collection for your curling, and definitely possible with the stick c built in accelerometer

Hi, thanks for your answer.

Regards

Jarain78

@gilow I hate waiting on deliveries but I'm glad to hear that you found a hero in australia post who found your stuff.

@mawg Glad I can help.

@mawg you can use google translate to convert from Chinese to English but chrome does it automatically

@ajb2k3 Thank you so much!

First, your code is badly indented (remember to press ^T in the Arduino IDE to format it properly) and thus unreadable. After proper formatting, here is what loop() looks like:

void loop() { new_time = millis(); /* check if to run this time */ if (new_time >= next_time) { /* Calculate distance */ echotime = GetEchoTime(); /* only scale valid readings 0 is timeout or 1 is no echo realistically minimum accurate or physical range is 3cm */ if (echotime > MAX_ERROR) { // Valid number convert to cm distance = echotime; distance += SCALE_CM_ROUND; // add in half bit rounding distance /= SCALE_CM; } /* catch errors first */ if (echotime <= MAX_ERROR || distance > MAX_RANGE) { if (echotime > 0 && echotime <= MAX_ERROR) Serial.println("MAX"); } else if (distance < MIN_RANGE) Serial.println("MIN"); else Serial.println(int(distance)); // In range output distance next_time = new_time + INTERVAL; // save next time to run } }

Now the simplest answer as to why "MAX" is never displayed is because the conditions are not reached. However, I'm not sure that the logic in your ifs is correct. You have an if/else if/else main test, and inside the if another if, and that doesn't make much sense. Work on that logic first.

@lastblade2 Alas, the Stick has been depreciated now and the Stick C and V and the current versions but the Stick V is not supported in UIFlow due to it unique features and lack of wifi.

It's a pretty cool device though, I made an x-ray

alt text

@heybin Need a list of specific actions