Topics created by taunushexe

@PaulSchulz Same here, maybe they forgot or a workaround can be to get rtc time and add 30 min to display correct time, hope its updated soon

Use a compatible RFID reader, authenticate if necessary, and send read commands via software or microcontroller in order to read a block from an RFID tag. Make sure that proper protocols are followed (LF, HF, UHF) and that data is retrieved securely. Integration of identification and access control systems enhances their efficiency.

Hello @taunushexe

the list blocks can be used for that. See example in UIFlow2 ProjectZone: M5Dial_Get_Values_From_Tuple_UIFlow_2.0.4

Thanks
Felix

Hello @taunushexe

as @ajb2k3 mentioned only one GPIO (the second one) is used for the RGB unit. So the other GPIO can still be used as input. I created an example which uses GPIO1 as input to control the color of the three RGB LEDs in the RGB unit.

See UIFlow2 Project Zone : M5Dial_RGBUnit_GPIO1_as_input_UIFlow2.0.4

Thanks
Felix

Use the json blocks to loads and send to the file io blocks