How to use the ExpPort For Core2 module
-
Hi,
I have confirmed that port E is working properly. However, I can't get port B to port D up. There are only two UI Flow menu selections, Port A and Port E for an Unit. I can't find the specs for the 4 DIP switches on the ExpPort For Core2 module. I need a clearer and more polite explanation of the ExpPort For Core2 module.Thank you in advance
Hirofumi -
Do you mean this chart that is on the product page?
or the information on this page?
https://docs.m5stack.com/en/module/extport_for_core2?ref=pfpqkvphmgr -
@ajb2k3 said in How to use the ExpPort For Core2 module:
o you mean this chart that is on the product page?
Hi,
Thank you for your reply.
Of course, I understand this information, but I'm asking because it doesn't work according to the information.Thank you in advance.
Hirofumi -
Ports B and C are not controlled by the board, they are connected directly to the bus and handled directly by the core.
As to D and E which are handled by the base.
Ports B and See only. become available when you select units that require ports B and C