How to connect ToF sensor to ProtoHat
-
I have a ToF sensor that has pin configured in this way Vin Gnd SCL SDA, I want to use it in Proto HAT module the problem is that, sensor's pins aren't symmetrical to HAT boards pin configurations and don't matches (and spaces to operate isn't too much). See the picture.
What you suggest? -
HI @AndreaF the space is a little tight, but perhaps you can put it in sideways and solder things to the right place via a few extra wires. As you can see in the picture of env hat below, the SDA of your TOF module should be connected to pin G0 and the SCL should be connected to G26
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login