Relay on I2C port cause M5Go to restart.
-
I'm testing the relay on Port A as its listed as a digital I/O port.
When triggered the relay works fine but when it releases the M5Go restarts.
Is this just me or an issue with the relay module. -
Ok its missing the back feed diode.
-
Hello @ajb2k3,
I remembered the question you said.
Anti-back charge diode.
Is it convenient for you to give detailed information? Especially the photos
-
@m5-docs I sent the diagrams to the support operator.
It is fine on the I/O port (B) but on A it cause the trip. I am worried that this could cause premature failure of io pins. -
@ajb2k3 the support operator?
-
heres an image showing the flyback/bypass diode missing from the relay
UIFlow, so easy an adult can learn it!
If I don't know it, be patient!
I've ether not learned it or am too drunk to remember it!
Author of the WIP UIFlow Handbook!
M5Black, Go, Stick, Core2, and so much more it cant be fit in here! -
@ajb2k3 Thanks a lot !
-
@ajb2k3 Can I know the source of your picture?
M5Stack documentation URL
https://docs.m5stack.com
-
@m5-docs said in Relay on I2C port cause M5Go to restart.:
@ajb2k3 Can I know the source of your picture?
Sorry, Gimme a sec to find it. Its a common diagram of the flyback/bypass diodes connected in relay modules
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login