ISO485 is provided terminal is GND or Shield?
-
Hello,
Regarding ISO485: https://docs.m5stack.com/en/unit/iso485
In ISO485 terminals it shows ground instead of shield as the third terminal as here https://static-cdn.m5stack.com/resource/docs/products/unit/iso485/iso485_04.webp and here: https://static-cdn.m5stack.com/resource/docs/products/unit/iso485/iso485_02.webp
But in the schematics it shows that terminal as shield: https://static-cdn.m5stack.com/resource/docs/products/unit/iso485/iso485_sch_01.webp
I guess it makes sense it is GND since it is RS485 requirements.
So what is the GND terminal really connected to? Is it connected to the GND of RS485 side or the the point shown as shield in schematics(where there is an RC parallel filter)?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login