My project was unpublished from M5Burner?
-
Someone told me that they could no longer see my firmware in M5Burner. When I logged in, I saw that many, but not all, of my firmware had been marked unpublished but not deleted. Any idea why?
) -
Too many problems are occurring with erasing Nemo from M5Stack devices that it has been removed until the issue is fixed.
-
I saw the other thread where it's mentioned G0 is being pulled high. I am not doing anything special, using the M5Stack-supplied arduino IDE libraries (and some additional ones for functionality), but nothing that would be interfering with GPIO. I have only on very rare occasion had to short pin G0 (via the m5stick headers or the G0 button on the cardputer) to get it out of a strange state.
If someone could give me some pointers on what the likely cause is, I can address it.
-
What ever its doing, Its blocking the UART port from firmware writing.
Does Nemo do UART Writes?
Can you share a link to your source? -
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login