function returning accel values of MPU6886 is buggy x and Z values are alwas identical
-
Hi,
in my previous post https://community.m5stack.com/topic/5561/imu-getaccel-returns-gyro-values I pointed out that UIFLOW2 repectively the phython code generated by blockly returns in case of my Atom S3 the wrong values, namely:Imu.getGyro() returns accel values
and
Imu.getAccel() returns gyro values.I noticed a further bug:
the accel values returned by Imu.getGyro() for x and z are always identical. If I tap on the device or move it around the x and the z values are always identical.I assume that the library has a bug. However I can not rule out that the the mpu6886 is wrongly wired to the esp32.
Could you please check whether the library is the cause for this strange behaviour.
Best regards,
Nestor -
@Nestor89 Thanks, you're right, it's a bug.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login