M5 LoRaWAN Unit (868MHz) using AT Command to receive downlink from TTN/Chirpstack.
-
Hello everyone, I'm trying to send a downlink from my LoRaWAN application server to my M5 LoRaWAN Unit based end node. The code given by M5Stack for receiving the message doesnt seem to work and after looking through the AT Commands datasheet of the ASR6501 module, I found out that an AT command needs be sent to the module to check if there are any saved downlink payload in the buffer. The original code given by M5 does not send this command to the module (just check the serial for any response from the module).
Has anyone gotten downlinks to work for this module? Any help is appreciated.
Regards,
Ameer -
@ameero95 managed to get a downlink message on Chirpstack with my private gateway but still no good result from TTN.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login