Looking for advice on Bluetooth & Audio
-
Hi Guys,
So im working on a little project, I have some experience with electronics and some with arduino. I am however far from an expert.
I am looking to build something based on the below requirements:
- Ability to use a mobile app to upload 4 audio files to an SD card (always 4 files, but they need to be able to be updated)
- Ability to play said audio files by pressing one of 4 buttons
Hardware:
I have an M5stack Core2, M5stickC and an M5Stack CoreS3 (on the way). I figured the Core2 would be a good option for this.My Question is, how should I approach this, where to start.
I use normal python at work, but again, not an expert
I have used arduino for a good number of years, but the most complex thing I built was a signal generator using I2c and an oled screen
I have played around with UIFlow (I like it) but suspect this may be a bit too limited for this purpose?Im just looking to prototype something, so I accept that the Core2 may be overkill.
Im guessing the hardest part is the bluetooth requirement as it;s not something ive really dealt with (other than as a consumer). I did think that I could split it up and use the app to upload the audio to cloud storage, and just have the M5 grab the files via wifi. But then that carries a wifi access requirement, and then I also need an easy way for people to connect it to wifi. Im looking for a smooth experience
Any advice welcome
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login