Trying to install Rhasspy on a M5 Atom Echo using platformio
-
Hi, I am trying to install a rhasspy/satellite software on a M5 Aton Echo, using platformio in VisualStudioCode.
However i get an error while trying to upload.
Has anyone succeeded in uploading something on an Atom Echo ? Here are my results of my tries :Auto-detected: COM3
Uploading .pio\build\m5stack-core-esp32\firmware.bin
esptool.py v3.1
Serial port COM3
Connecting....
Chip is ESP32-PICO-D4 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, Embedded Flash, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: 94:b9:7e:8c:c1:c8
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 460800
Changed.
Configuring flash size...A fatal error occurred: Timed out waiting for packet header
*** [upload] Error 2 -
Hello @Jevylux
try a slower upload speed, like 115200. E.g. add this line in
platform.ini:upload_speed = 115200Thanks
Felix
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login