How to attached M5GO BOTTOM2 (For CORE2 only) to CORE2
-
I have just received my M5GO BOTTOM2 FOR CORE2 ONLY, but can not find any guide, video or pictures showing how to attached / mount the M5GO BOTTOM2 to CORE2 - so how can I do that without destroy it ?
-
Hello @AgreeDK
Here is how I did it:
- removed the small white board labelled: CORE 2
- unscrewed the four screws holding the gray bottom plate
- removed the gray bottom plate (careful as the battery is attached to the plate)
- disconnected the battery
- stacked the M5GO Bottom2
- screwed in the longer four screws (optional)
Happy Stacking!
Felix -
Hi @felmue , thanks for your input, I was almost there, but wanted to be sure I had to remove the old battery and not needed to connet the one in M5Go.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login