UIFlow 1.6.3

[ajb2k3]

@m5stack there is an alignment issue with the German version of the Web UIFlow, looks like the formatting has been broken.

[veryalien]

The vibration motor intensity setting has no effect. Setting it to any value between 0 and 100 does not change the motor at all. The motor is always fully on when it is enabled.

[m5stack]

@ajb2k3 thanks feedback. we will fix it ASAP

[klapaucius]

This may be a super stupid question but where are the download links for the recent firmwares ?

On MacOS, M5burner shows just and empty screen. The flow.m5stack.com site does not show firmware download links (just links to the m5burner tool containing no firmware).

https://github.com/m5stack/M5Stack-Firmware/blob/master/firmware-repo.list only shows outdated firmware (which I can upload manually using the flash.sh script after sufficient massaging).

Also note that the UIflow desktop app does not seem to work - it looks like the baud rate might be too high for the mac.

Thanks in advance for clarifying!

[kurthofman]

Hello, I've upgraded my M5Stack Fire too 1.6.3 but the device doesn't boot anymore.
I get :
E (433) esp_image: invalid segment length 0xffffffff
E (433) boot: Factory app partition is not bootable
E (433) boot: No bootable app partitions in the partition table
Can this be solved !

[ajb2k3]

@kurthofman to you upgrade to the correct version of 1.6.3?
there is 3 versions for the core

[klapaucius]

@ajb2k3

Is there a download link for the latest firmwares ? The M5burner on MacOS seems broken (I can into details if you want me to), but I can flash firmware manually without problems. But I can't find download links published anywhere.

Many thanks in advance!

[klapaucius]

@ajb2k3

Is there a download link for the latest firmwares ? The M5burner on MacOS seems broken (I can into details if you want me to), but I can flash firmware manually without problems. But I can't find download links published anywhere.

Many thanks in advance!

[Skink]

@kurthofman

Here is a breakdown of the versions for the respective M5 Core's

what I don't know exactly is if M5 Core Lite and M5GO are not also part of M5Core Fire.

[Skink]

@veryalien
Yes I have to agree with you, I have the same problem.
With "Set vibration intensity" alone the vibration motor does not work at all, no matter if 1-100%.
If I switch it on with "Set vibration enable (true)" the motor will vibrate but with the same intensity, I try to change the intensity with "Set vibration intensity" but nothing happens.
I can only switch it off with "Set vibration enable (false)"!

[ajb2k3]

@skink the lite and the go are Mark 1 cores

[GMAN]

Bug report: firmware 1.6.3-en is not installing on M5 stack core (black) 1.6.2 does.

[m5stack]

@gman what is your mean? can't install the firmware file? or can't burn the firmware? could you say more detail?