Hello @IAMLIUBO

the MQTT block fails when trying to connect to HIVEMQ broker using SSL. I found that for a successful connection an additional parameter server_hostname in the ssl_params is required. Please see this post.

Thanks
Felix

@iamliubo said in UIFlow 1.9.0:

@felmue

Now the button move to the bottom right,one is call "Run" means the workspace's code only run once,if you reboot the device code won't run again,and another one call "Download" means downlaod the workspace's code to the device filesystem and run, the code in the deivce won't disappear when you reboot or somethings.

In a word, "Run" button is recommend for developing mode, and "Download" button is deploy after develop.

Hello @IAMLIUBO

understood, but that was not my point. I am only talking about the "Download" button which when pressed shows a popup saying "Uploading".

0_1644914996019_UiFlowUpload220215.png

but it's really just a cosmetic issue - don't worry about it.

Thanks
Felix

@felmue said in UIFlow 1.8.6:

Hello @Phuturist

using UIFlow 1.9.0 works for me (well kind of). With M5Core2 I can use the whole LCD unit screen (eg. 135 x 240). However with M5Atom (or M5StickCPlus) I can only use part of it, else there is an out of memory error. Here is what works for me with M5Atom.

0_1642182495468_M5AtomLCDUnitUIFlow_220114.png
Thanks
Felix

Thanx Felix, it's indeed now working for a small partion of the screen when connected to my M5StickC Plus. Trying to set it to it's actual size indeed results in a memory allocation error. I had seen that one before as well but didnt think it was related to the screen size. If anyone knows how to fix the memory allocation error, please let me know.

I have updated to this version my core2 with faces keyboard, and the led are bright at 100%. I have not been able to stop them.

I saw the firmware issue comping ages ago. @m5stack this is why I recommended you build a firmware customiser that only builds the firmware with user selectable modules.
You were going to run out of capacity trying to support all the hardware options in the way that you are currently trying.

Hello @m5stack

the board name returned for M5Stamp Pico is incorrect. With below lines I get Atom.

import deviceCfg print(deviceCfg.get_board_name())

Thanks
Felix

@dario @m5stack I have the same problem here. Is it going to be fixed?

Hello @m5stack

it looks like there might be an issue with the Vibration Motor Unit which only runs very slowly or not at all when using the dedicated blocks. However when using the analog output directly it works. The difference is with the dedicated block the GPIO output doesn't go higher than 0.5 V whereas with the analog block it goes up to 3.3 V as expected.

Note: I personally do not have a Vibration Motor Unit - my conclusion is solely based on looking at the schematic and measuring the GPIO output of my M5StickC Plus using either of the aforementioned blocks.

However user @dailletaille verified it to work with the analog block, so please also see this topic here.

Thanks
Felix

@m5stack said in UIFlow 1.8.4:

We are very sorry, we are working hard to supplement the support of related modules

thx for reply, maybe all will be happy if we can see some roadmap with HW implementation.

The range of ids of the Set id block in myCobot is wrong. It should be from 1 to 6, but from 2 to 7.

@ajb2k3
ESP-NOW uses only the MAC address of the station.
However, SoftAP is displayed as your own MAC address of ESP-NOW.
I want the MAC address of the station to be displayed.

The problem is that the received MAC address is different from your own MAC address.

in the german version of UIflow Remote+ the slider function is faulty in the english version it is ok i searched for a long time until i found it0_1626729513974_slider.jpg

@kmart93179 weight unit is not used the I2C protocol of course they not compatible.

@chefrocker I need this one too.

@iamliubo Thank you.

@iamliubo May I ask you if you are part of M5Stack staff?
Not to bother you, just to understand the M5 ecosystem ;)

Still no working Bluetooth for the Core 2?
I want to scan Bluetooth sensors from RuuviTag that transmit in advertising mode!

Hello @m5stack

thank you for the clarification. I appreciate it.

Thanks
Felix

Thank you!

@mati We've created a special new topic called "Features wish list" in order to address such questions and requests directly, please post all your wishes and requirements for new features over there and we will make sure to address them ASAP! :)